 |
FCST-HC-SC
FCST
FCST-HC-SC
50
FCST-HC-SC Push Fit Duct Coupler,Experience the same fast and easy installation of our Push-Lock couplers now with a new, clear body design.Simply push the duct ends into the coupler for a locked and air-sealed assembly. The non-metallic construction provides excellent corrosion resistance in buried or encased applications and also has desirable dielectric properties.
Pre-lubricated O-ring is water-tight and air-tight.
Suitable for both cable pulling & jetting applications.
Compatible with 25/30/32/40/42.2/46/50/60/63mm pipes.
Simple, one person "push-on"assembly lowers installation costs.
Self-locking ring design assembles in seconds and is re-enterable.
High strength molded plastic body is ideal for buried duct applications.
Construction | Description |
Material | Body:ABS Sealing Ring:NBR |
Reference Standard | JT/T496-2018、Q/KL020-2005 |
Appearance | Surface gloss, no impurities, no flash, no bubbles, no cracks, complete thread. |
Tensile Resistance(Under Tightened State) | ≥4300N(32mm) |
Weight(g) | 102.3g(32mm) |
High Temperature Resistance | -40℃~+60℃ |
High Pressure Resistance | 20Bar |
Service Life | 20Years |
1.Cut both ends of the silicon core tube flat and clean;
2.Assemble the connection in the order of connection;
3.Tighten with the special tools provided with this product to ensure that the assembly sequence is correct, and when the tightening is in place (Note:No need to use after burning tools in the tightening process), the joint sealing performance reaches a good condition;
4.The connector can be disassembled and assembled many times. After a long time use, disassemble the joint and reinstall it, please carefully check the effectiveness of the sealing ring Sex. If damage is found, it should be replaced.
1.What is the production capacity of micro duct coupler?
14/10mm
Daily production capacity: 23,000 pcs.
Monthly production capacity: 780,000 pcs.
2.How many production facilities and employees does FCST have?
1.Factory area: 12,000 square meters.
2.Number of employees: 150 people.
3.High-speed punching machines: 10 sets.
4.Plastic injection molding machines: 43 sets.
5.Sealing ring compression molding machines: 4 sets.
6.CNC machine tools: 60 sets.
7.Automated parts assembly production lines: 40 sets.
8.Manual assembly presses: 20 sets.
9.Semi-automated Microduct Connector assembly machines: 2 sets.
10.Product testing equipment: 10 sets.
3.Which parts of coupling for hdpe pipe can be customized in color?
Customizable Parts:Retaining Ring,Spring Sleeve,Release Sleeve,Locking Clip
Customizable Color: The colors can refer to RAL color card and PANTONE color card.
4.What processes are required for customizing Clear-Lock coupler?
5.What environmental certifications do Push Lock Couplers comply with?
Rhos、Reach
