Product Category

Contact Us

Tel: +86 21 3872 6791

Fax: +86 21 3872 6792
Mobile: +86 187 2062 4696

Email:sales@fcst.com

Skype:fcstsales91

Whatsapp:+8618720624696

Follow Us

Share to:

FCST-FMC6 SC/APC Fiber Optic Connectors

5 0 Reviews
Fast fiber connector is used for field-installable optical fiber connector, widely used in Fiber To The Home (FTTH) access optical networks, not only for single-mode or multimode fiber, and can also choose to 900um,3 mm and the introduction of cable buffered type. With fast installation time and low insertion loss, the connector system provides a good alternative to fusion splicing. Installation is as easy as strip, clean, cleave cam and crimp.
Availability:
Quantity:
  • FCST-FMC6
  • FCST
  • FCST-FMC6

Product Overview

Fast fiber connector is used for field-installable optical fiber connector, widely used in Fiber To The Home (FTTH) access optical networks, not only for single-mode or multimode fiber, and can also choose to 900um,3 mm and the introduction of cable buffered type. With fast installation time and low insertion loss, the connector system provides a good alternative to fusion splicing. Installation is as easy as strip, clean, cleave cam and crimp.

Product Advantages

Interconnection of two mated fibers occurs inside the ferrule hole, providing precise fiber alignment (patent-design)

The ferrule hole with a accuracy of 1.0um controls both the embedded fiber and the coming fiber and ensures the interconnection of the two fibers.

Interconnection inside the ferrule hole  -  Strong adaptability for different OD of fibers

In the event of deviation between different diameters of the embedded fiber(D1) and the coming fiber(D2), and both in the same capillary hole, there is a clear advantage to C slot design; the mis-alignment distance shall be a maximum less than(D1-D2)/2. While using the V-groove alignment, it is equal or more than D1-D2.

Ceramic material has excellent compatibility with the glass fiber and low thermal expansion coefficient-over a wide operation range:--40℃~+85℃

Ceramic material assures low insertion loss change value under 0.1dB during the tests of high temperature test, low temperature test and high-low temperature cycling test.

Ceramic material has a distinctive advantage—Ceramic is more rigid and will not deform at the fiber interconnection point.

As ceramic material has better tensile strength than plastic material, when Fibers interconnected inside the ferrule hole, it ensures the fiber interconnection point is not easy to deform.

Ceramic material has good performance—long life-time

Ceramic ferrules pass “Pressure Cooker Test” and “-85℃~+85℃ test” etc. And the ferrules still meet or exceed the ferrule hole roughness, flatness and precision interconnection requirements due to the clean and non-deformed ceramic ferrule hole after the tests.

The Field Mountable Fiber Optic Connector is easy to be assembled by using a special fixed-length fiber-cut-off jig. Fiber insertion loss is smooth with a high field-assembly yield as the ferrule entry funnel easily guides the fiber forward.

Product Specifications

Project

Technical parameters

Optical Fiber

2mm×3mm drop cable & 2.0mm & 3.0mm cord.

Plug Type

SC/APC(screw type, total length of 58mm)

Fiber Mode

Single Mode

Insertion Loss

Average≤0.3dB,Max≤0.5dB

Return Loss

APC:≥55dB

One-Time Assembly Yield

≥97%

Assembly Repeatability

≥5 times

Average Assembly Time

≤3minute

Life-Time

≥30years

Tensile Strength

≥30N(2.0x3.0 drop cable.)

Operation Temperature

-40℃~+85℃


Previous: 
Next: 
Contact us
Contact Us

Contact Us

  +86 21 3872 6791
 +86 21 3872 6792
  Rm402 block A Watts gallop tower No.2816 YiXian Rd, BaoShan District, Shanghai 200441.
Our Products

Our Products

Solution

Solution

Quick Links

Quick Links

©2021 Fiber Cable Solution Technology Co.,Ltd. All Rights Reserved.