 |
| Quantity: | |
|---|---|
FCST-FMC4
FCST
FCST-FMC4
Product Overview
Fast fiber connector is used for field-installable optical fiber connector, widely used in Fiber To The Home (FTTH) access optical networks, not only for single-mode or multimode fiber, and can also choose to 900um,3 mm and the introduction of cable buffered type. With fast installation time and low insertion loss, the connector system provides a good alternative to fusion splicing. Installation is as easy as strip, clean, cleave cam and crimp.
Product Advantages
l Interconnection of two mated fibers occurs inside the ferrule hole, providing precise fiber alignment (patent-design)
l The ferrule hole with a accuracy of 1.0um controls both the embedded fiber and the coming fiber and ensures the interconnection of the two fibers.
l Interconnection inside the ferrule hole - Strong adaptability for different OD of fibers
l In the event of deviation between different diameters of the embedded fiber(D1) and the coming fiber(D2), and both in the same capillary hole, there is a clear advantage to C slot design; the mis-alignment distance shall be a maximum less than(D1-D2)/2. While using the V-groove alignment, it is equal or more than D1-D2.
l Ceramic material has excellent compatibility with the glass fiber and low thermal expansion coefficient-over a wide operation range:--40℃~+85℃
l Ceramic material assures low insertion loss change value under 0.1dB during the tests of high temperature test, low temperature test and high-low temperature cycling test.
l Ceramic material has a distinctive advantage—Ceramic is more rigid and will not deform at the fiber interconnection point.
l As ceramic material has better tensile strength than plastic material, when Fibers interconnected inside the ferrule hole, it ensures the fiber interconnection point is not easy to deform.
l Ceramic material has good performance—long life-time
l Ceramic ferrules pass “Pressure Cooker Test” and “-85℃~+85℃ test” etc. And the ferrules still meet or exceed the ferrule hole roughness, flatness and precision interconnection requirements due to the clean and non-deformed ceramic ferrule hole after the tests.
l The Field Mountable Fiber Optic Connector is easy to be assembled by using a special fixed-length fiber-cut-off jig. Fiber insertion loss is smooth with a high field-assembly yield as the ferrule entry funnel easily guides the fiber forward.
Product Specifications
Project | Technical parameters |
Optical Fiber | 2.0mmx3.1mm Butterfly type |
Plug Type | SC/APC（snap cap type, total length of 53mm） |
Fiber Mode | Single Mode |
Insertion Loss | Average≤0.3dB，Max≤0.5dB |
Return Loss | APC：≥55dB |
One-Time Assembly Yield | ≥97% |
Assembly Repeatability | ≥5 times |
Average Assembly Time | ≤3minute |
Life-Time | ≥30years |
Tensile Strength | ≥30N（2.0x3.0 drop cable.） |
Operation Temperature | -40℃~+85℃ |
Product Overview
Fast fiber connector is used for field-installable optical fiber connector, widely used in Fiber To The Home (FTTH) access optical networks, not only for single-mode or multimode fiber, and can also choose to 900um,3 mm and the introduction of cable buffered type. With fast installation time and low insertion loss, the connector system provides a good alternative to fusion splicing. Installation is as easy as strip, clean, cleave cam and crimp.
Product Advantages
l Interconnection of two mated fibers occurs inside the ferrule hole, providing precise fiber alignment (patent-design)
l The ferrule hole with a accuracy of 1.0um controls both the embedded fiber and the coming fiber and ensures the interconnection of the two fibers.
l Interconnection inside the ferrule hole - Strong adaptability for different OD of fibers
l In the event of deviation between different diameters of the embedded fiber(D1) and the coming fiber(D2), and both in the same capillary hole, there is a clear advantage to C slot design; the mis-alignment distance shall be a maximum less than(D1-D2)/2. While using the V-groove alignment, it is equal or more than D1-D2.
l Ceramic material has excellent compatibility with the glass fiber and low thermal expansion coefficient-over a wide operation range:--40℃~+85℃
l Ceramic material assures low insertion loss change value under 0.1dB during the tests of high temperature test, low temperature test and high-low temperature cycling test.
l Ceramic material has a distinctive advantage—Ceramic is more rigid and will not deform at the fiber interconnection point.
l As ceramic material has better tensile strength than plastic material, when Fibers interconnected inside the ferrule hole, it ensures the fiber interconnection point is not easy to deform.
l Ceramic material has good performance—long life-time
l Ceramic ferrules pass “Pressure Cooker Test” and “-85℃~+85℃ test” etc. And the ferrules still meet or exceed the ferrule hole roughness, flatness and precision interconnection requirements due to the clean and non-deformed ceramic ferrule hole after the tests.
l The Field Mountable Fiber Optic Connector is easy to be assembled by using a special fixed-length fiber-cut-off jig. Fiber insertion loss is smooth with a high field-assembly yield as the ferrule entry funnel easily guides the fiber forward.
Product Specifications
Project | Technical parameters |
Optical Fiber | 2.0mmx3.1mm Butterfly type |
Plug Type | SC/APC（snap cap type, total length of 53mm） |
Fiber Mode | Single Mode |
Insertion Loss | Average≤0.3dB，Max≤0.5dB |
Return Loss | APC：≥55dB |
One-Time Assembly Yield | ≥97% |
Assembly Repeatability | ≥5 times |
Average Assembly Time | ≤3minute |
Life-Time | ≥30years |
Tensile Strength | ≥30N（2.0x3.0 drop cable.） |
Operation Temperature | -40℃~+85℃ |
