Fiber Cable Blowing FAQs And Solutions

1.Outer protection tube blocked

a. Clean the outer protective tube: blow sponge balls into the HDPE duct to remove accumulated water and dust that block along the air blown fiber duct; survey the location of obstacles in the outer protective tube and remove them.

2.HDPE fiber optic conduit an't blow

a. Check whether the air blowing equipment is operating normally.

b. Check whether the air blowing accessories of the micro duct air blowing machine meet the requirements of the outer protection tube, the outer diameter of the micro duct and the quantity of the air blowing micro conduit.

3.The air blowing distance of the micro duct is not enough

a. Check whether the outer protective tube is pre-lubricated.

b. Check whether the outer protective tube is damaged.

c. Check whether the outer protection tube is clean.

d. Check whether the direct buried microduct seal is intact.

e. Check whether the size of the micro duct matches the outer protective duct.

f.Check whether the blowing location is suitable.

g. Check whether the blowing mode is correct.

4.Air blown fibre microduct blowing speed is slow

a. Check whether the outer protective tube is pre-lubricated.

b. Check whether the micro duct seal is intact.

c. Check whether the size of the micro duct matches the outer protective duct.

5.Micro conduit damaged during laying

a. Check whether the subduct laying path is normal.

b. Check whether the working pressure of the air blowing equipment is normal such as fiber blowing machine.

c. Check whether the micro duct is always filled with internal air pressure during the air blowing process.

d. Check whether the thrust of the device exceeds the designed micro duct tensile load.

6.Underground micro cable can't blow

a. Check whether the air blowing equipment is working properly.

b. Check whether the air blowing accessories of the micro duct air blowing machine meet the requirements of the fibre blowing microduct.

7.Micro cable blowing distance is not enough

a. Check whether the telecom duct pipe are penetrated and processed.

b. Check whether the micro duct seal is intact.

c. Check whether the micro air blown fiber size matches the micro duct.

d. Check whether the air blowing micro cable size matches the micro duct.

e. Check whether the cable jetting mode is correct.

FCST Air Blowing Machines for Cable Jetting

FCST - Better FTTx, Better Life.

We have been designing, manufacturing and supplying passive components for fiber optical networks since 2003. Everything we do in FCST is designed to provide efficient, simple and innovative solutions to solve complicated tasks.

We offer 4 solutions

lFTTH ODN Solution

lUnderground Cable Installation Solution

lAerial Cable Installation Solution

lFiber Tools & Test Solution

As a FTTx solution supplier, we can also do ODM according to project. We will continue to innovate and contribute more to the construction of the global optical fiber network.