 |
| Quantity: | |
|---|---|
FFS-80S
FCST
FFS-80S
Product Overview
FFS-80S High Precision Fusion Splicer With smart appearance, reliable quality, Fusion Splicer is a special design for the installation, operation and maintenance of optical fiber specially design a precision, durable, convenient optical fiber construction instrument. Widely used in the construction, inspection, maintenance of fiber cable.
Product Advantages
l 300 X or Y view, 200 X and Y view.
l Large amplification and clear core.
l Used for FTTH and ordinary fiber project.
l Cladding to Cladding alignment by PAS technology.
l 9 sec splicing time and 30 sec heat time.
l With 5200 mAh Ultra-large capacity Li battery.
l Small size and light weight, 1.98KG including battery
l Three in one fixture, splicing single fiber, cable indoor and pigtail.
l Built in large capacity lithium battery of 200 times splicing and heating.
l 5 inch digital high-quality LCD screen, observe X and Y view at same time.
l V type high power automatic heater with steel based thick film，high thermal efficiency, fast heating and long life.
Product Specifications
Construction | Description |
Splicing Type | SM, MM, DS, NZDS |
Splicing Loss | 0.02dB(SM)，0.01dB(MM)，0.04dB(DS)，0.04dB(NZDS) |
Return Loss | >60dB |
Splicing Mode | Manual, Half Auto, Auto |
Fiber Alignment | Core to Core Alignment by PAS technology |
Applicable Fiber | Cable indoor and 0.25mm,0.9mm fiber,SC connector(option) |
Splicing Time | ≤9s |
Heat Time | ≤30s Auto Heat |
Cleaved Length | 12～16mm |
Fiber Image/ Magnification | 300/200 |
View Display | 5 inch digital high-quality LCD screen |
Tension Test | Standard 2N (option) |
Heat Shrinkable Sleeve | 60mm, 40mm and serials heat Shrinkable Sleeve |
Battery Capacity | 200 cycles splicing and heating, 3 hours charging time (splicing and charging at same time) |
Battery Life | Cycling charge 300-500 times, easy to replace battery |
Electrodes Life | 3000, easy to replace electrodes |
Power Source | ≤20W |
Interface | USB Convenient data download and software update |
Construction Lighting | Built in high brightness, wide range of lights, easy to operate at night |
Power Supply | Built in lithium battery 5200mAh 11.1V; external adapter, input: AC100-240V, output: DC13.5V/4.5A |
Operating Condition | 0-5000m above sea level, Temperature: -10-60℃, Humidity:0～95%RH (No dew) |
Weight | 1.98 KG (including battery) |
Dimension (LxWxH) | 135mm(L)×158mm(W)×155mm(H) |
Standard Configuration
Name | Qty |
Fusion Splicer | 1 set |
Fiber Cleaver | 1 pc |
Fiber Stripper | 1 pc |
AC Adatpor | 1 pc |
Carrying Case | 1 pc |
Li Battery | 1 pc |
Charger | 1 pc |
Spare Electrodes | 1 pair |
Cooling Tray | 1 pc |
Product Advantages
Automatic heating, adjustable temperature, preset multiple modes.
The clamp has been optimized for multiple generations, and the clamping effect is good, and there will be no broken fiber or offset.
5200mAh Li-battery, typical 200 cycles splicing and heating, pluggable inner Li-battery.
Product Application
Package
Product Overview
FFS-80S High Precision Fusion Splicer With smart appearance, reliable quality, Fusion Splicer is a special design for the installation, operation and maintenance of optical fiber specially design a precision, durable, convenient optical fiber construction instrument. Widely used in the construction, inspection, maintenance of fiber cable.
Product Advantages
l 300 X or Y view, 200 X and Y view.
l Large amplification and clear core.
l Used for FTTH and ordinary fiber project.
l Cladding to Cladding alignment by PAS technology.
l 9 sec splicing time and 30 sec heat time.
l With 5200 mAh Ultra-large capacity Li battery.
l Small size and light weight, 1.98KG including battery
l Three in one fixture, splicing single fiber, cable indoor and pigtail.
l Built in large capacity lithium battery of 200 times splicing and heating.
l 5 inch digital high-quality LCD screen, observe X and Y view at same time.
l V type high power automatic heater with steel based thick film，high thermal efficiency, fast heating and long life.
Product Specifications
Construction | Description |
Splicing Type | SM, MM, DS, NZDS |
Splicing Loss | 0.02dB(SM)，0.01dB(MM)，0.04dB(DS)，0.04dB(NZDS) |
Return Loss | >60dB |
Splicing Mode | Manual, Half Auto, Auto |
Fiber Alignment | Core to Core Alignment by PAS technology |
Applicable Fiber | Cable indoor and 0.25mm,0.9mm fiber,SC connector(option) |
Splicing Time | ≤9s |
Heat Time | ≤30s Auto Heat |
Cleaved Length | 12～16mm |
Fiber Image/ Magnification | 300/200 |
View Display | 5 inch digital high-quality LCD screen |
Tension Test | Standard 2N (option) |
Heat Shrinkable Sleeve | 60mm, 40mm and serials heat Shrinkable Sleeve |
Battery Capacity | 200 cycles splicing and heating, 3 hours charging time (splicing and charging at same time) |
Battery Life | Cycling charge 300-500 times, easy to replace battery |
Electrodes Life | 3000, easy to replace electrodes |
Power Source | ≤20W |
Interface | USB Convenient data download and software update |
Construction Lighting | Built in high brightness, wide range of lights, easy to operate at night |
Power Supply | Built in lithium battery 5200mAh 11.1V; external adapter, input: AC100-240V, output: DC13.5V/4.5A |
Operating Condition | 0-5000m above sea level, Temperature: -10-60℃, Humidity:0～95%RH (No dew) |
Weight | 1.98 KG (including battery) |
Dimension (LxWxH) | 135mm(L)×158mm(W)×155mm(H) |
Standard Configuration
Name | Qty |
Fusion Splicer | 1 set |
Fiber Cleaver | 1 pc |
Fiber Stripper | 1 pc |
AC Adatpor | 1 pc |
Carrying Case | 1 pc |
Li Battery | 1 pc |
Charger | 1 pc |
Spare Electrodes | 1 pair |
Cooling Tray | 1 pc |
Product Advantages
Automatic heating, adjustable temperature, preset multiple modes.
The clamp has been optimized for multiple generations, and the clamping effect is good, and there will be no broken fiber or offset.
5200mAh Li-battery, typical 200 cycles splicing and heating, pluggable inner Li-battery.
Product Application
Package
