 |
FCST02210
FCST
FCST02210
Product Overview
FCST02210 type Optical fiber boxes by the company's independent development and production, product performance in line with the industry standard YD / T2150-2010 requirements. FTTX access systems are mainly used in the terminal part. Case made of high strength PC / ABS alloy plastic injection molding, with good sealing and anti-aging properties, in the outdoor wall, hanging rod installation or indoor wall installation.
Product Advantages
l Internal use of double-layer structure design, flip board flip angle of 90 °. Flip the upper plate of the cable into the end zone, the lower cable splice, coiled store. Outside the cabinet bottom for cable entry fixed, fixed wing cable and cassette storage Optical mounting area. Trunk and distribution cable partition is placed, do not interfere, facilitate construction operations and ongoing maintenance.
l Along the left side of the box has two holes into the cable, are installed waterproof connector can be simultaneously introduced two outdoor fiber optic cable and 16 butterfly, the cable-hole seal plug, in the cabinets meet outdoor cable straight or disagreements splicing and connecting cable into the side of the butterfly, while meeting the cabinet reaches IP55 level sealing performance.
l Splice disc in one piece, to meet the 12-core or 24 core capacities.
l Adapter installation unit can be mounted 12 SC adapters.
l Butterfly fixed storage unit with coiled cable structure, single-hole lead, and can be ordered fixed butterfly laying fiber optic cable.
Product Specifications
Construction | Description |
Max. Capacity | 24 Cores |
Material | PC/ABS |
Dimension (mm) | 250*225*65 |
Inlets/Outlets | 2/13 |
Installation | Pole/Aerial |
Net Weight（g） | 1850 |
Protection Level | IP55 |
Temperature | -40℃~+60℃ |
Humidity | ≤95%（+40℃） |
Atmospheric Pressure | 70KPa~108 Kpa |
Installation
Wall mounting
(1) In the box to set the upper and lower ends of three expansion screw mounting holes, according to the mounting hole dimensions, with self-tapping screws 4 M6 × 45 of the housing can be fixed to the wall.
(2) Check box installation, after passing the door closed. In order to prevent rainwater from entering the cabinet should tighten the column with the key.
(3) The introduction of fiber optic outdoor cables and butterfly according to construction requirements.
Arm installation
(1) can be configured according to the requirements of the cabinet mounting plate and hoop, the hoop release penetrating mounting plate.
(2) Through the hoop to secure the backplane to the pole. To prevent accidents, you should check the locking hoop poles, solid and reliable, no loose.
Design And Customization Services
l Provide service with whole process from blueprint to product to the customer.
l Meet customer’s requirement to customize logo in suitable place for existing product.
l Meet customer’s requirement to make reasonable modify and customization for existing product.
l Provide free design according to the requirement of customer after signed cooperative agreement.
Product Overview
FCST02210 type Optical fiber boxes by the company's independent development and production, product performance in line with the industry standard YD / T2150-2010 requirements. FTTX access systems are mainly used in the terminal part. Case made of high strength PC / ABS alloy plastic injection molding, with good sealing and anti-aging properties, in the outdoor wall, hanging rod installation or indoor wall installation.
Product Advantages
l Internal use of double-layer structure design, flip board flip angle of 90 °. Flip the upper plate of the cable into the end zone, the lower cable splice, coiled store. Outside the cabinet bottom for cable entry fixed, fixed wing cable and cassette storage Optical mounting area. Trunk and distribution cable partition is placed, do not interfere, facilitate construction operations and ongoing maintenance.
l Along the left side of the box has two holes into the cable, are installed waterproof connector can be simultaneously introduced two outdoor fiber optic cable and 16 butterfly, the cable-hole seal plug, in the cabinets meet outdoor cable straight or disagreements splicing and connecting cable into the side of the butterfly, while meeting the cabinet reaches IP55 level sealing performance.
l Splice disc in one piece, to meet the 12-core or 24 core capacities.
l Adapter installation unit can be mounted 12 SC adapters.
l Butterfly fixed storage unit with coiled cable structure, single-hole lead, and can be ordered fixed butterfly laying fiber optic cable.
Product Specifications
Construction | Description |
Max. Capacity | 24 Cores |
Material | PC/ABS |
Dimension (mm) | 250*225*65 |
Inlets/Outlets | 2/13 |
Installation | Pole/Aerial |
Net Weight（g） | 1850 |
Protection Level | IP55 |
Temperature | -40℃~+60℃ |
Humidity | ≤95%（+40℃） |
Atmospheric Pressure | 70KPa~108 Kpa |
Installation
Wall mounting
(1) In the box to set the upper and lower ends of three expansion screw mounting holes, according to the mounting hole dimensions, with self-tapping screws 4 M6 × 45 of the housing can be fixed to the wall.
(2) Check box installation, after passing the door closed. In order to prevent rainwater from entering the cabinet should tighten the column with the key.
(3) The introduction of fiber optic outdoor cables and butterfly according to construction requirements.
Arm installation
(1) can be configured according to the requirements of the cabinet mounting plate and hoop, the hoop release penetrating mounting plate.
(2) Through the hoop to secure the backplane to the pole. To prevent accidents, you should check the locking hoop poles, solid and reliable, no loose.
Design And Customization Services
l Provide service with whole process from blueprint to product to the customer.
l Meet customer’s requirement to customize logo in suitable place for existing product.
l Meet customer’s requirement to make reasonable modify and customization for existing product.
l Provide free design according to the requirement of customer after signed cooperative agreement.
