Availability: | |
---|---|
8-Ways 1410mm With PE Sheath 1.2mm TW Series HDPE Tube Bundle
FCST
8-Ways 1410mm With PE Sheath 1.2mm TW Series HDPE Tube Bundle
1 | Visual appearance | Visual inspection | Ribbed inside & smooth outside surface, free from blisters, shrink hole, flaking, scratches & roughness. |
2 | Outer diameter | FCST | 14.0mm ± 0.1mm |
3 | Wall thickness | FCST | 1.20mm ± 0.10mm |
4 | Inner diameter clearance | Blowing steel ball | A 8.5mm steel ball can be blown freely through the duct. |
5 | Ovality | FCST | ≤ 5% |
6 | Pressurization | 5 minutes @25bar each duct | No damage and leakage |
7 | Kink | IEC 60794-1-2 Method E10 | ≤ 140mm |
8 | Tensile strength | Rate of extension: 100mm/min | ≥ 1350N |
9 | Crush | Sample length: 250mm Load: 1400N Duration of Max. load: 1 min Recovery time: 1 hour | No residual deformation > 15% of inner and outer diameter, shall pass inner diameter clearance test. |
10 | Impact | IEC 60794-1-2 Method E4 1.5J Impact, recovery time 1 hour | No residual deformation > 15% of inner and outer diameter, shall pass inner diameter clearance test. |
11 | Heat reversion | 110℃ ~ 23℃, 1 hour | ≤ 3% |
12 | Min. bend radius | 168mm | No residual deformation > 15% of inner and outer diameter, shall pass inner diameter clearance test. |
13 | Co-efficient of Friction | 750mm Diameter, 450°loop, 5kg mass | ≤ 0.1 |
14 | Color and printing | Visual inspection | As per customer specification |
Test | Characteristic | Test Method | Acceptance Criteria |
Physical and Mechanical Properties – tube bundles | |||
1 | Visual appearance | Visual inspection, Outer sheath: Black | Ribbed inside & smooth outside surface, free from blisters, shrink hole, flaking, scratches & roughness. |
2 | Outer diameter | FCST | 58.4mm*30.4mm (± 1.1mm) |
3 | Sheath Wall thickness | FCST | 1.20mm ± 0.00mm |
4 | Pressurization | 5 minutes @ 25 bar each duct | No damage and leakage |
5 | Tensile strength | Rate of extension: 100mm/min | ≥ 8200N |
6 | Crush | Sample length: 250mm Load: 2000N Duration of Max. load: 1 min Recovery time: 1 hour | No residual deformation > 15% of inner and outer diameter, shall pass inner diameter clearance test. |
7 | Impact | IEC 60794-1-2 Method E4 15.0J Impact, recovery time 1 hour | No residual deformation > 15% of inner and outer diameter, shall pass inner diameter clearance test. |
8 | Min. bend radius | 620mm | No residual deformation > 15% of inner and outer diameter, shall pass inner diameter clearance test. |
9 | Color and printing | Visual inspection | Orange or as per customer specification |
Notice:Completed packages of the HDPE micro duct on drum can be stored outdoor max. 6 months upon the date of production.Storage temperature: -40°C ~ +70°C;Installation temperature: -30°C ~ +50°C;Operating temperature: -40°C ~ +70°C.
Packing Information
1 | Visual appearance | Visual inspection | Ribbed inside & smooth outside surface, free from blisters, shrink hole, flaking, scratches & roughness. |
2 | Outer diameter | FCST | 14.0mm ± 0.1mm |
3 | Wall thickness | FCST | 1.20mm ± 0.10mm |
4 | Inner diameter clearance | Blowing steel ball | A 8.5mm steel ball can be blown freely through the duct. |
5 | Ovality | FCST | ≤ 5% |
6 | Pressurization | 5 minutes @25bar each duct | No damage and leakage |
7 | Kink | IEC 60794-1-2 Method E10 | ≤ 140mm |
8 | Tensile strength | Rate of extension: 100mm/min | ≥ 1350N |
9 | Crush | Sample length: 250mm Load: 1400N Duration of Max. load: 1 min Recovery time: 1 hour | No residual deformation > 15% of inner and outer diameter, shall pass inner diameter clearance test. |
10 | Impact | IEC 60794-1-2 Method E4 1.5J Impact, recovery time 1 hour | No residual deformation > 15% of inner and outer diameter, shall pass inner diameter clearance test. |
11 | Heat reversion | 110℃ ~ 23℃, 1 hour | ≤ 3% |
12 | Min. bend radius | 168mm | No residual deformation > 15% of inner and outer diameter, shall pass inner diameter clearance test. |
13 | Co-efficient of Friction | 750mm Diameter, 450°loop, 5kg mass | ≤ 0.1 |
14 | Color and printing | Visual inspection | As per customer specification |
Test | Characteristic | Test Method | Acceptance Criteria |
Physical and Mechanical Properties – tube bundles | |||
1 | Visual appearance | Visual inspection, Outer sheath: Black | Ribbed inside & smooth outside surface, free from blisters, shrink hole, flaking, scratches & roughness. |
2 | Outer diameter | FCST | 58.4mm*30.4mm (± 1.1mm) |
3 | Sheath Wall thickness | FCST | 1.20mm ± 0.00mm |
4 | Pressurization | 5 minutes @ 25 bar each duct | No damage and leakage |
5 | Tensile strength | Rate of extension: 100mm/min | ≥ 8200N |
6 | Crush | Sample length: 250mm Load: 2000N Duration of Max. load: 1 min Recovery time: 1 hour | No residual deformation > 15% of inner and outer diameter, shall pass inner diameter clearance test. |
7 | Impact | IEC 60794-1-2 Method E4 15.0J Impact, recovery time 1 hour | No residual deformation > 15% of inner and outer diameter, shall pass inner diameter clearance test. |
8 | Min. bend radius | 620mm | No residual deformation > 15% of inner and outer diameter, shall pass inner diameter clearance test. |
9 | Color and printing | Visual inspection | Orange or as per customer specification |
Notice:Completed packages of the HDPE micro duct on drum can be stored outdoor max. 6 months upon the date of production.Storage temperature: -40°C ~ +70°C;Installation temperature: -30°C ~ +50°C;Operating temperature: -40°C ~ +70°C.
Packing Information